INVESTIGATION OF THE TRIBOLOGICAL PROPERTIES OF THE ADDITION OF DIFFERENT AMOUNTS OF CHROMIUM TO MOLYBDENUM-CONTAINING POWDER METAL STEEL AFTER QUENCHING

Authors

  • Harun ÇUĞ Karabuk University
  • Rajab Husseın Rajab ELKILANI Karabuk University
  • Mehmet Akif ERDEN Karabuk University

DOI:

https://doi.org/10.59287/as-proceedings.547

Keywords:

Powder Metallurgy, Wear, Microstructure, Hardness, Heat Treatment

Abstract

This study focuses on the wear and hardness properties of Cr and quenching heat treatment of Mo steel produced by powder metallurgy.Mo steel containing different amounts of chromium (Cr) was pressed unidirectionally at 700MPa. It was sintered at 1400°C in an argon atmosphere for 2 hours. The results obtained showed that the addition of chromium and heat treatment increased the mechanical properties.

Author Biographies

Harun ÇUĞ, Karabuk University

Mechanical Engineering,  Turkey

Rajab Husseın Rajab ELKILANI, Karabuk University

Mechanical Engineering, Turkey

Mehmet Akif ERDEN, Karabuk University

Medikal Engineering, Turkey

Downloads

Published

2023-12-12

How to Cite

ÇUĞ, H., ELKILANI, R. H. R., & ERDEN, M. A. (2023). INVESTIGATION OF THE TRIBOLOGICAL PROPERTIES OF THE ADDITION OF DIFFERENT AMOUNTS OF CHROMIUM TO MOLYBDENUM-CONTAINING POWDER METAL STEEL AFTER QUENCHING. AS-Proceedings, 1(6), 661–665. https://doi.org/10.59287/as-proceedings.547

Issue

Vol. 1 No. 6 (2023): Proceeding Book of 2nd International Conference on Frontiers in Academic Research ICFAR 2023

Section

Conference Papers

Most read articles by the same author(s)